2016 Chevrolet Cruze Key Fob Programming
Updated 2026 Programming, battery & replacement fob
You can program a 2016 Chevrolet Cruze key fob yourself in a few minutes using a working key or remote, no dealer visit needed. Follow the steps below, then check the battery and the correct replacement fob (with FCC ID and part number) if you need a new one.
This GM vehicle comes in two ignition types. On a regular key ignition you can add a key with one working key. On push-button start you program transmitters — use the method that matches whether you have a working transmitter.
Before you start
- Your new key/transmitter, cut beforehand
Regular key ignition (adds a key, keeps existing keys)
- 1Insert the original, already-programmed key and start the engine.
- 2Turn the key off and remove it.
- 3Within 10 seconds, insert the new key and turn to ON (don't start).
- 4The security light goes out once the key is programmed (it may be too quick to see). No security light? Wait 10 minutes and 45 seconds.
- 5Repeat from step 1 for additional keys.
Push-button start — with at least one working transmitter
- 1Place the recognized (working) transmitter in the cupholder.
- 2Insert the new key into the driver's-door lock cylinder and turn to unlock five times within 10 seconds. The Driver Information Center shows READY FOR REMOTE #2–5.
- 3Pull out the cupholder and place the new transmitter in the transmitter pocket beneath it.
- 4Press the ignition. When learned, the display is ready for the next transmitter.
- 5Remove the transmitter and press Unlock. To add more, repeat the last three steps. When done, press and hold the ignition 5 seconds to exit.
Push-button start — with no working transmitter
Takes about 30 minutes; up to 5 transmitters. Connect jumper cables or a charger — battery voltage drops during this procedure.
- 1Insert the new key into the driver's-door lock cylinder and turn to unlock five times within 10 seconds. The display shows REMOTE LEARN PENDING, PLEASE WAIT.
- 2Wait 10 minutes until the display shows PRESS ENGINE START BUTTON TO LEARN, then press the ignition. It shows REMOTE LEARN PENDING again.
- 3Repeat the previous step two more times. After the third, all previous transmitters stop working and the display shows READY FOR REMOTE #1.
- 4Pull out the cupholder and place the new transmitter in the transmitter pocket beneath it.
- 5Press the ignition. When learned, the display is ready for the next transmitter.
- 6Remove the transmitter and press Unlock. To add more, repeat the last three steps, then press and hold the ignition 5 seconds to exit.
Replacement key fobs
Find your key type below, then match the FCC ID printed on the back of your existing fob — or, for a plain transponder key, the blank code — to be sure of the right part.
Proximity Key
2 versionsStays in your pocket — the car unlocks and starts without inserting a key.
4/5-button Proximity Key
Find on Amazon- FCC ID
- HYQ4AA
- OE part #
- 13508768, 13508770, 13529661, 13529663, 13584496
- Frequency
- 315 MHz
- Chip
- PHILIPS ID 46 GM EXT
3/4/5-button Proximity Key
Find on Amazon- FCC ID
- HYQ4EA
- OE part #
- 13508769, 13508771, 13519177, 13519178, 13529638, 13529639 +11 more
- Frequency
- 433 MHz
- Chip
- PHILIPS ID 46
Remote Head Key
4 versionsOne piece: a cut metal blade with the lock/unlock buttons built into the head.
4/5-button Remote Head Key
Find on Amazon- FCC ID
- OHT05918179, P4O9MK74946931
- OE part #
- 13500224, 13500225, 13500318, 13500319, 13504202, 13504236 +20 more
- Frequency
- 315 MHz
- Chip
- PHILIPS ID 46
3/4-button Remote Head Key
Find on Amazon- FCC ID
- LXP-T004
- OE part #
- 13513042, 13513841, 13513842, 13514111, 13514112, 13514134 +14 more
- Frequency
- 433 MHz
- Chip
- PHILIPS ID 46 GM EXT
4-button Remote Head Key
Find on Amazon- FCC ID
- LXP-T003
- OE part #
- 13521061, 13522768, 13522790, 13529044, 13529061, 13530751 +3 more
- Frequency
- 315 MHz
- Chip
- PHILIPS ID 46 GM EXT
4/5-button Remote Head Key
Find on Amazon- FCC ID
- AVL-B01T1AC, AVL-B01T2AC, KR55WK50073, OHT01060512, V2T01060512, V2T01060514
- OE part #
- 13500221, 13500222, 13500226, 13500227, 13501513, 13501514 +35 more
- Frequency
- 315 MHz
- Chip
- PHILIPS ID 46 GM EXT
Photos show the OEM part for each number listed. Aftermarket replacements sold online are often slightly different in appearance — the FCC ID, not the shape, is what determines whether a fob will work with your car.
2016 Chevrolet Cruze key fob battery
Your 2016 Chevrolet Cruze key fob uses a CR2032 3V lithium coin cell. A fresh one typically lasts 3–5 years.
Find CR2032 batteries on AmazonHow to replace the battery
- 1 Slide the release latch and pull the metal emergency key out of the fob.
- 2 Use that key (or a coin) to pry the two halves apart at the seam.
- 3 Lift out the old coin cell — note which side faces up.
- 4 Drop in the new battery the same way (printed + side usually faces the back cover).
- 5 Press the case back together until it clicks, then test lock/unlock and push-to-start.
Battery tips
- Use a fresh, name-brand 3V lithium cell — bargain cells drain quickly.
- Even with a dead fob battery you can usually still start the car by holding the fob against the start button — check your owner's manual.
- If the fob still won't work after a new battery, it may need re-syncing or programming.
We may earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It never affects which product we recommend. Learn more.
Rather hire a pro?
See what it actually costs, broken out by dealer, locksmith, and DIY: